|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Previous Datasheet Index Next Data Sheet DISCRETE POWER DIODES and THYRISTORS DATA BOOK D-374 To Order Previous Datasheet Index Next Data Sheet Bulletin I25169/B ST380CH..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (E-PUK) Low profile hockey-puk to increase current-carrying capability Extended temperature range 960A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I 2t @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical case style TO-200AB (E-PUK) Units A C A C A A KA2s KA2s V s C ST380CH..C 960 80 2220 25 12500 13000 782 713 400 to 600 100 - 40 to 150 D-375 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 ST380CH..C 06 V DRM /V RRM , max. repetitive peak and off-state voltage V 400 600 VRSM , maximum nonrepetitive peak voltage V 500 700 I DRM /I RRM max. @ TJ = TJ max mA 100 On-state Conduction Parameter I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current ST380CH..C 960 (440) 80 (110) 2220 12500 13000 10500 11000 Units Conditions A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms A t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA2s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. 12 I2 t Maximum I2t for fusing 782 713 553 505 I 2 t Maximum I2t for fusing 7820 0.85 t = 0.1 to 10ms, no voltage reapplied (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 rt2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Typical latching current V 0.88 ( x IT(AV) < I < 20 x x IT(AV)), TJ = TJ max. (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. m 0.24 1.58 600 mA 1000 T J = 25C, anode supply 12V resistive load V ( x IT(AV) < I < 20 x x IT(AV)),TJ = TJ max. 0.25 2222222222222 I = 2900A, TJ = TJ max, t = 10ms sine pulse pk p Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current t t d ST380CH..C 1000 1.0 Units Conditions A/s Gate drive 20V, 20, t 1s TJ = TJ max, anode voltage 80% VDRM Gate current 1A, di /dt = 1A/s g r Typical delay time Typical turn-off time s q V = 0.67% VDRM, TJ = 25C d 100 ITM = 550A, TJ = TJ max, di/dt = 40A/s, VR = 50V dv/dt = 20V/s, Gate 0V 100, t = 500s p D-376 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5- On-state Power Loss Characteristics Fig. 6- On-state Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled D-380 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series Fig. 9 - On-state Voltage Drop Characteristics Fig. 10 - Thermal Impedance Z thJ-hs Characteristics Fig. 11 - Gate Characteristics D-381 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series Blocking Parameter dv/dt Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current ST380CH..C 500 100 Units Conditions V/s mA TJ = TJ max. linear to 80% rated VDRM TJ = TJ max, rated V DRM/V RRM applied I RRM IDRM Triggering Parameter PGM Maximum peak gate power ST380CH..C 10.0 2.0 3.0 20 Units Conditions W A TJ = TJ max, t 5ms p PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage TYP. 200 IGT DC gate current required to trigger 100 40 2.5 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 1.8 1.0 TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t 5ms p V 5.0 MAX. 200 3.0 10 0.25 mA V V mA TJ = TJ max, t 5ms p 23 TJ = - 40C TJ = 25C TJ = 150C TJ = - 40C TJ = 25C TJ = 150C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied TJ = TJ max Thermal and Mechanical Specification Parameter TJ T stg ST380CH..C -40 to 150 -40 to 150 0.09 0.04 0.02 0.01 9800 (1000) Units C Conditions Max. operating temperature range Max. storage temperature range RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10% DC operation single side cooled K/W DC operation double side cooled DC operation single side cooled DC operation double side cooled N (Kg) g See Outline Table K/W wt Approximate weight Case style 83 TO - 200AB (E-PUK) D-3773333 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle 180 120 90 60 30 Sinusoidal conduction Single Side Double Side 0.010 0.012 0.015 0.022 0.036 0.011 0.012 0.015 0.022 0.036 Rectangular conduction Single Side Double Side 0.007 0.012 0.016 0.023 0.036 0.007 0.013 0.017 0.023 0.037 Units Conditions TJ = TJ max. K/W 12 Ordering Information Table Device Code ST 1 38 2 0 3 CH 4 06 5 C 6 1 7 8 1 2 3 4 5 6 7 - Thyristor Essential part number 0 = Converter grade CH = Ceramic Puk, High temperature Voltage code: Code x 100 = VRRM (See Voltage Rating Table) C = Puk Case TO-200AB (E-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 2222222222222 8 - Critical dv/dt: None = 500V/sec (Standard selection) L = 1000V/sec (Special selection) D-378 To Order Previous Datasheet Index Next Data Sheet ST380CH..C Series Outline Table ANODE TO GATE CREEPAGE DISTANCE: 11.18 (0.44) MIN. STRIKE DISTANCE: 7.62 (0.30) MIN. 25.3 (0.99) DIA. MAX. 0.3 (0.01) MIN. 14.1 / 15.1 (0.56 / 0.59) 0.3 (0.01) MIN. 25.3 (0.99) DIA. MAX. 40.5 (1.59) DIA. MAX. GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE Case Style TO-200AB (E-PUK) All dimensions in millimeters (inches) 2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 6.5 (0.26) 4.75 (0.19) 23 25 5 42 (1.65) MAX. 28 (1.10) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics D-3793333 To Order |
Price & Availability of ST380CH |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |